dmesg - Intel Core 2 Solo U3500
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-33-generic (buildd@toyol) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #44-Ubuntu SMP Thu Mar 12 12:19:35 UTC 2015 (Ubuntu 3.16.0-33.44-generic 3.16.7-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007db8ffff] usable
BIOS-e820: [mem 0x000000007db90000-0x000000007db9dfff] ACPI data
BIOS-e820: [mem 0x000000007db9e000-0x000000007dbdffff] ACPI NVS
BIOS-e820: [mem 0x000000007dbe0000-0x000000007dbfffff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Micro-Star International X300/X340/X400 series /MS-1361/MS-1352/MS-1462, BIOS A1352IMS Ver1.0N 09/29/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7db90 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07DC00000 mask FFFC00000 uncachable
2 base 07E000000 mask FFE000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2012MB, range: 4MB, type UC
reg 2, base: 2016MB, range: 32MB, type UC
total RAM covered: 2012M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2012MB, range: 4MB, type UC
reg 2, base: 2016MB, range: 32MB, type UC
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x7d800000-0x7d9fffff]
[mem 0x7d800000-0x7d9fffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7d7fffff]
[mem 0x7c000000-0x7d7fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7da00000-0x7db8ffff]
[mem 0x7da00000-0x7db8ffff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
RAMDISK: [mem 0x34896000-0x36442fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9600 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000007DB90000 000050 (v01 MSI_NB MEGABOOK 20090929 MSFT 00000097)
ACPI: FACP 0x000000007DB90200 000084 (v01 092909 FACP1416 20090929 MSFT 00000097)
ACPI: DSDT 0x000000007DB905C0 007AAF (v01 1ADTS 1ADTS017 00000017 INTL 20051117)
ACPI: FACS 0x000000007DB9E000 000040
ACPI: APIC 0x000000007DB90390 00006C (v01 092909 APIC1416 20090929 MSFT 00000097)
ACPI: MCFG 0x000000007DB90400 00003C (v01 092909 OEMMCFG 20090929 MSFT 00000097)
ACPI: SLIC 0x000000007DB90440 000176 (v01 MSI_NB MEGABOOK 20090929 MSFT 00000097)
ACPI: OEMB 0x000000007DB9E040 000072 (v01 092909 OEMB1416 20090929 MSFT 00000097)
ACPI: HPET 0x000000007DB9A5C0 000038 (v01 092909 OEMHPET 20090929 MSFT 00000097)
ACPI: ASF! 0x000000007DB9A600 000099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
ACPI: GSCI 0x000000007DB9E0C0 002024 (v01 092909 GMCHSCI 20090929 MSFT 00000097)
ACPI: SSDT 0x000000007DBA02F0 000253 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x000000007DBA0550 000594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x000000007DBA0AF0 0002D7 (v01 PmRef CpuPm1 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007db8ffff]
Initmem setup node 0 [mem 0x00000000-0x7db8ffff]
NODE_DATA [mem 0x7db8b000-0x7db8ffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b200000-ffff88007d1fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0x7db8ffff]
On node 0 totalpages: 514857
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 7983 pages used for memmap
DMA32 zone: 510864 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7e000000-0x7fffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 4 CPUs, 3 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0x80000000-0xfed1ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007d800000 s82432 r8192 d24064 u524288
pcpu-alloc: s82432 r8192 d24064 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 506789
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1981292K/2059428K available (7745K kernel code, 1197K rwdata, 3612K rodata, 1360K init, 1308K bss, 78136K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1396.445 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2792.89 BogoMIPS (lpj=5585780)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
ftrace: allocating 29327 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Solo CPU U3500 @ 1.40GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (2792.89 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7db9e000-0x7dbdffff] (270336 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:27:48, date: 04/04/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x7dc00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xc400-0xc407]
pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit]
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xc800-0xc81f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xc480-0xc49f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fec00-0xfe9fefff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xcc00-0xcc1f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe9ff000-0xfe9ff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xdc00-0xdc07]
pci 0000:00:1f.2: reg 0x14: [io 0xd880-0xd883]
pci 0000:00:1f.2: reg 0x18: [io 0xd800-0xd807]
pci 0000:00:1f.2: reg 0x1c: [io 0xd480-0xd483]
pci 0000:00:1f.2: reg 0x20: [io 0xd400-0xd41f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfe9ff800-0xfe9fffff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfeaff000-0xfeafffff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xfdff0000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: [8086:4232] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xfebfe000-0xfebfffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7dc00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7db90000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:04: [io 0x04c0-0x04cf] has been reserved
system 00:04: [io 0x04d2-0x04ff] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0800-0x087f] could not be reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0x7dbfffff] could not be reserved
system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: BAR 15: assigned [mem 0x7dc00000-0x7ddfffff 64bit pref]
pci 0000:00:1c.3: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.3: bridge window [mem 0x7dc00000-0x7ddfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7dc00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 2 [mem 0x7dc00000-0x7ddfffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0x7dc00000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28340K (ffff880034896000 - ffff880036443000)
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1428175669.048:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 3925
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.3: enabling device (0106 -> 0107)
pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010400000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (47 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fec00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-33-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9ff000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-33-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-33-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 27437300f8ee183c8811434feb7fd95fc68782ec'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 11:229:495
rtc_cmos 00:01: setting system clock to 2015-04-04 19:27:49 UTC (1428175669)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1360K (ffffffff81d2d000 - ffffffff81e81000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 436K (ffff880001793000 - ffff880001800000)
Freeing unused kernel memory: 484K (ffff880001b87000 - ffff880001c00000)
systemd-udevd[101]: starting version 208
random: systemd-udevd urandom read with 7 bits of entropy available
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000372000, 00:24:21:6e:4c:bf, XID 1c4000c0 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[drm] Initialized drm 1.1.0 20060810
usb 2-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ff900 irq 43
ata2: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ff980 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ffb00 irq 43
ata6: SATA max UDMA/133 abar m2048@0xfe9ff800 port 0xfe9ffb80 irq 43
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:2c: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 2-1: New USB device found, idVendor=0bda, idProduct=0158
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: USB2.0-CRW
usb 2-1: Manufacturer: Generic
usb 2-1: SerialNumber: 20071114173400000
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ums-realtek 2-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-1:1.0
usbcore: registered new interface driver ums-realtek
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: FUJITSU MJA2320BH G2, 00000018, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MJA2320B 0018 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
psmouse serio1: sentelic: Finger Sensing Pad, hw: 12.1.1, sn: 0, sw: 1.1.0-K
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input6
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (203) killed by TERM signal
Adding 2058236k swap on /dev/sda5. Priority:-1 extents:1 across:2058236k FS
systemd-udevd[330]: starting version 208
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
gpio_ich: GPIO from 195 to 255 on gpio_ich
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
input: MSI WMI hotkeys as /devices/virtual/input/input8
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
sound hdaudioC0D0: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x18
sound hdaudioC0D0: Internal Mic=0x12
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
audit: type=1400 audit(1428175684.748:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=410 comm="apparmor_parser"
audit: type=1400 audit(1428175684.748:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=410 comm="apparmor_parser"
audit: type=1400 audit(1428175684.748:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=410 comm="apparmor_parser"
audit: type=1400 audit(1428175684.752:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=417 comm="apparmor_parser"
audit: type=1400 audit(1428175684.752:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=417 comm="apparmor_parser"
audit: type=1400 audit(1428175684.752:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=417 comm="apparmor_parser"
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: Error while reading from descriptor: Broken pipe
init: failsafe main process (640) killed by TERM signal
audit: type=1400 audit(1428175686.932:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=802 comm="apparmor_parser"
audit: type=1400 audit(1428175686.932:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=802 comm="apparmor_parser"
audit: type=1400 audit(1428175686.940:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
audit: type=1400 audit(1428175686.940:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=802 comm="apparmor_parser"
init: cups main process (804) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
systemd-logind[1036]: New seat seat0.
systemd-logind[1036]: Watching system buttons on /dev/input/event3 (Power Button)
systemd-logind[1036]: Watching system buttons on /dev/input/event5 (Video Bus)
systemd-logind[1036]: Watching system buttons on /dev/input/event0 (Lid Switch)
systemd-logind[1036]: Watching system buttons on /dev/input/event1 (Sleep Button)
systemd-logind[1036]: Watching system buttons on /dev/input/event2 (Power Button)
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-logind[1036]: Failed to start unit user@112.service: Unknown unit: user@112.service
systemd-logind[1036]: Failed to start user service: Unknown unit: user@112.service
systemd-logind[1036]: New session c1 of user lightdm.
systemd-logind[1036]: Linked /tmp/.X11-unix/X0 to /run/user/112/X11-display.
systemd-logind[1036]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[1036]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[1036]: New session c2 of user izi.
systemd-logind[1036]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
audit_printk_skb: 63 callbacks suppressed
audit: type=1400 audit(1428175717.480:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2221 comm="apparmor_parser"
audit: type=1400 audit(1428175717.480:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2221 comm="apparmor_parser"
audit: type=1400 audit(1428175717.480:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=2221 comm="apparmor_parser"
iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 02:30:b4:e7:24:50
wlan0: send auth to 02:30:b4:e7:24:50 (try 1/3)
wlan0: authenticated
iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 02:30:b4:e7:24:50 (try 1/3)
wlan0: RX AssocResp from 02:30:b4:e7:24:50 (capab=0x431 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: deauthenticating from 02:30:b4:e7:24:50 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with 02:30:b4:e7:24:50
wlan0: send auth to 02:30:b4:e7:24:50 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 02:30:b4:e7:24:50 (try 1/3)
wlan0: RX AssocResp from 02:30:b4:e7:24:50 (capab=0x431 status=0 aid=4)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: disassociated from 02:30:b4:e7:24:50 (Reason: 1)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 02:30:b4:e7:24:50
wlan0: send auth to 02:30:b4:e7:24:50 (try 1/3)
wlan0: authenticated
iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 02:30:b4:e7:24:50 (try 1/3)
wlan0: RX AssocResp from 02:30:b4:e7:24:50 (capab=0x431 status=0 aid=4)
wlan0: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=13fe, idProduct=1c00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Flash Disk
usb 1-1: Manufacturer: USB 2.0
usb 1-1: SerialNumber: 07009078090025D4
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi7 : usb-storage 1-1:1.0
scsi 7:0:0:0: Direct-Access USB 2.0 Flash Disk PMAP PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdc] 3935000 512-byte logical blocks: (2.01 GB/1.87 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 7:0:0:0: [sdc] No Caching mode page found
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 7:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[3286]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-1: USB disconnect, device number 2
usb 1-1: new high-speed USB device number 3 using ehci-pci
usb 1-1: New USB device found, idVendor=1005, idProduct=b113
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB FLASH DRIVE
usb 1-1: Manufacturer:
usb 1-1: SerialNumber: 197B0F002BB6
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi8 : usb-storage 1-1:1.0
scsi 8:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 8:0:0:0: [sdc] No Caching mode page found
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-1: USB disconnect, device number 3
usb 1-1: new high-speed USB device number 45 using ehci-pci
usb 1-1: New USB device found, idVendor=13fe, idProduct=1a21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB DISK Pro
usb 1-1: Manufacturer:
usb 1-1: SerialNumber: 07660990CBFF
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-1:1.0
scsi 9:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdc] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdc] No Caching mode page found
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 9:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-1: USB disconnect, device number 45
usb 1-1: new high-speed USB device number 46 using ehci-pci
usb 1-1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB DISK 2.0
usb 1-1: SerialNumber: A826DD1C
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-1:1.0
scsi 10:0:0:0: Direct-Access USB DISK 2.0 8.07 PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdc] 3891200 512-byte logical blocks: (1.99 GB/1.85 GiB)
sd 10:0:0:0: [sdc] Write Protect is off
sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 10:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdc: detected capacity change from 1992294400 to 0
usb 1-1: USB disconnect, device number 46
usb 1-1: new high-speed USB device number 47 using ehci-pci
usb 3-1: new full-speed USB device number 2 using uhci_hcd
usb 3-1: device descriptor read/64, error -71
audit: type=1400 audit(1428177757.489:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=8958 comm="apparmor_parser"
audit: type=1400 audit(1428177757.489:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=8958 comm="apparmor_parser"
audit: type=1400 audit(1428177757.489:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=8958 comm="apparmor_parser"